VRSF Front Mount Intercooler kit for the BMW 135i / 335i N54 and N55
The VRSF Intercooler is offered in two size options, 5 inch and 7 inch.
The VRSF 5" Intercooler offers that ability to install your FMIC on your BMW 135i or 335i without the need of trimming your bumpers shroud. However, when looking for utmost efficiency in your intercooler we recommend the VRSF 7 inch intercooler. Keep in mind that with the VRSF 7" FMIC you will need to cut a couple inches of bumper shrouding, however, this is common practice on most oversized intercoolers and a dremel or sharp knife is all you need to get the job done.
If your BMW 135i / 335i is a 2009, 2010 or 2011 you will need the charge pipe upgrade. The 2007-2008 BMW 135i / 335i do not need this upgrade.
The VRSF 7" FMIC was designed to be one of the best performing direct bolt on intercoolers available on the market. The VRSF intercooler features 3D CAD designed cast aluminum end tanks for improved flow over sheet metal end tanks & durability. We use a custom bar & plate intercooler core and a custom fin pack designed to our exact specification which we've developed over the past 7 years with great success on our Evo & DSM platforms. Our 7" intercooler allows for higher HP gains, mainly due to it's ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock. The VRSF Intercooler kit for the BMW 135i and BMW 335i include all necessary custom molded couplers and stainless steel t-bolt clamps necessary for installation.
Applications: 2007-2011 BMW 135i / 335i N54 and N55
Includes: Intercooler, Lower Charge Pipe, 2 Couplers and 4 T Bolt Clamps.